Modulo mando a distancia RF Puerta GARAGE (12VDC) - 5 mandos

Modulo mando a distancia RF Puerta GARAGE (12VDC) - 5 mandos

Cod. 21665
Disponibilidad: Tiempo Aproximado de entrega:
83,20€
IVA Incluido
Modulo mando a distancia RF Puerta GARAGE (12VDC) - 5 mandosModulo mando a distancia RF Puerta GARAGE (12VDC) - 5 mandosModulo mando a distancia RF Puerta GARAGE (12VDC) - 5 mandosModulo mando a distancia RF Puerta GARAGE (12VDC) - 5 mandosModulo mando a distancia RF Puerta GARAGE (12VDC) - 5 mandosModulo mando a distancia RF Puerta GARAGE (12VDC) - 5 mandos
Características

Módulo es para apertura y cierre de puertas de garaje.
Los mando se comunican con el receptor por RF.
El receptor se puede conectar al WIFI del local o vivienda y automatizarlo con ALEXA o GOOGLE, para utilizarlo por voz o por las APP

Carastersiticas:

  • Input voltage:DC/AC 7V~32V AC85-250V
  • Radio Frequency:433Mhz 433.92MHz
  • Codes: Working with any fixed and rolling code remote control
  • Working temperature: -20℃~70℃
  • Programming: press and hold the learn button on the receiver few seconds.
  • Then hold and press the remote control button to programming.
  • Delete code: Press and hold the delete code about 20 seconds.
  • Checklist before using the device
  • Your smart phone or tablet has connected to a2.4g WiFi with internet.
  • You need to enable Bluetooth of the phone.You have the correct WiFi PWD.
  • You have the correct WiFi PWD.
  • You smart phone or tablet must have access to APPstore,Google play.
  • Your router is MAC-open

Checklist before using the device

  • Your smart phone or tablet has connected to a2.4g WiFi with internet.
  • You need to enable Bluetooth of the phone.You have the correct WiFi PWD.
  • You have the correct WiFi PWD.
  • You smart phone or tablet must have access to APPstore,Google play.
  • Your router is MAC-open

433mhz Transmitter PROGRAMMING:

  • 1.Learning transmitter’s codes:
    • Press “learn 1” or “learn 2” for 2 second, the “learn_led” light, then, press the button which you choose on the transmitter till the “learn_led” flash and go out, the transmitter’s code has been stored.
    • Repeat the above steps for other transmitters.
  • 2.Erasing transmitter’s codes:
    • Press “learn 1” or “learn2” and hold on to make the “learn_led light till go out, all codes of transmitters which had been stored are erased.

App Remote Control

Control your garage door opening and closing from any location with the Tuya/Smart Life App